DM542 DSP Digital Stepper Motor Driver | 3D Printer | Boards

This is DM542 DSP Digital Stepper Motor Driver from the category 3D Printer | Boards.

Principal characteristics:

1. A 20 KHz chopping rate

Signal input for optical isolation 2.

3. An adjustable DIP switch for output current

4. The bipolar constant-current cutting technique

High segmentation numbers include: 2, 4, 8, 16, 32, 64, 128, 256.5, 10, 25, 50, 125, and 200.

6. Support for TTL input signals while accepting input from differential signals

7. The driver employs discrete components, so as long as there is no over voltage and the wiring is correct, you can use two-phase 4-wire, 6-wire, or 8-wire stepper motors from the 57 series that are 4.5A or less (including 4.5A).

8. Good coworker for our linear guide rails

Specification:

Energy source: DC 24-60 (V)

Maximum current: 4.5A

1.5A–4.5A in output phase current

Input current for logic: 10–20 mA

Operating range: -15 to +45 degrees

Size: 11.7

Note: Import Dukan Purchase Directly From Manufacturer and Deliver to you without any extra charge hence We are able to provide Lowest rate and Standard Quality.