This is 13.56mhz PN532 NFC Card-reader Module Compatible Raspberry Pi from the category Robots | Module.Specification:NXP chip PN532Voltage of Operation: 3.3VVoltage Range: 3.3 to 5.5V150 mA maximum supply current100mA Working Current in Standby Mode120 mA Working Current (Write Mode)120 mA in worki..
This is 16 Channel 12-bit PWM Servo Drive Shield Module from the category Robots | Module.16-channel PWM servo driver module with 16 servos is what is specified.battery for the rudder Maximum 6V independent V+ input.Independent output of logic signals and logic power, 3-5 v.40 to 1000 hertz.16 chann..
This is 16-Channel 12-Bit I2C PWM Servo Driver Module from the category Robots | Module.Specifications: 1 I2C input, 16 channels of PWM output, and 16 servos can be driven.2 Servo independent V + maximum 6V input3 Logic signal and logic power supply independently produce 3-5 volts4 Frequency range: ..
This is 3 Channel IR Infrared Tracking Sensor from the category Robots | Module.Specification:5V is the operating voltage.IR detector: CTRT50003-way infrared tracking sensor, typeUtilizing infrared detection, having strong anti-interference capabilities, using the CTRT5000 sensor, allowing for confi..
This is 3.3-5V Raindrops Detect Sensor from the category Robots | Module.Specification: Equipped with a precision potentiometer that may be adjusted for sensitivityThe 3.3V-5V operating voltagea digital switching outputs output format (0 and 1)bolt holes that are fixed for simple installationSize: 5..
This is 3.3V NRF24L01+ Socket Adapter Plate for Wireless Module from the category Robots | Module.
26 x 19 x 12 mm in size
For the 8 Pin NRF24L01+ Module.
A straightforward socket board with an AMS1117-3.3 chip on it for the NRF24L01 wireless..
This is 3pin IR Infrared Obstacle Avoidance Module from the category Robots | Module.The output signal of the comparator has a fine, clear waveform and has a driving capacity of 15 mA.has an adjustable sensitivity precision potentiometer.Operating Voltage: 3.3 V to 5 VThe output is in the following ..
This is 4 Way Infrared Detection Tracking Photoelectric Sensor from the category Robots | Module.Specification:DC 3.3V–5V is the working voltage.Try to select a power source with a working current greater than 1A.Working range: -10 °C to +50 °CAperture for mounting: M3 screwsDetection range: adjusta..
This is 4.8-6V Multi Servo Tester with Indicator Light from the category Robots | Module.Specification:Servo tester, ESC, or CCPM Servo testerInput: 15 mA (5.0)DC4.8–6V is the voltage consumption.Output Signal time: 1.5?0.5ms24 x 42.5 x 23.5 mm in size1x Steering Gear Tester is included in the packa..
This is 42 Stepper Motor Driver Expansion Board DRV8825 A4988 3D Printer from the category Robots | Module.Specification:42 x 42 x 15 mm in size3mm fixed1400 × 1400 mil pitch (35.56 x 35.56mm)Voltage for logic: 5VVoltage range: 12 to 30VDigital portsDirection, enablement, and speedModules that apply..
This is 4pin Infrared Speed Sensor from the category Robots | Module.Specification:1. Making use of slot-type optocoupler sensors2. A 5mm groove width.3. The output low level light is on, the output high level light is off, and there is an output status indicator.4, There is occlusion and the output..
This is 4X4 Matrix Keyboard Push Buttons Tastatur Switch Keypad with LED Display from the category Robots | Module.4x4 Matrix Push Buttons, 4 Independent Push Buttons, and 8 LEDS are the specifications.Size:50mm*60mmOne 4x4 push button matrix keyboard is included in the package.Note: Import Dukan Pu..