This is 0.28 Inch LED Display Digital Temperature Voltmeter from the category Modules | Voltmeter.Product specifications:56 mm by 31 mm by 13.5 mmAccuracy of measurements: 1V and 1 °CRange of temperatures: -10 °C to 150 °Cthe 8 to 18 volt rangeLength of line: 100 cmMode of the power supply: DC two-w..
This is 0.28" DC0-100V 10A/50A/100A LED Digital Voltmeter Ammeter Tester from the category Modules | Voltmeter.Note: Import Dukan Purchase Directly From Manufacturer and Deliver to you without any extra charge hence We are able to provide Lowest rate and Standard Quality...
This is 0.28" DC0-100V LED Digital Voltmeter Ammeter Tester from the category Modules | Voltmeter.Product specifications:Range of voltage measurements: 0.0V to 100VRange of the power supply: DC4-28.0VVoltage inaccuracy: 0.1%Error currently: 1%75 milliohms are the external shunt parameters.20 mA work..
This is 0.56 inch DC 3-18V LED Digital Voltmeter Panel for car from the category Modules | Voltmeter.Feature: 1. This voltmeter has a fully enclosed shell and can withstand brief immersion in water without suffering any harm.2. Three 0.56-inch LED digital tubes are used to display the tiny voltmeter..
This is 0.96 Inch ESP8266 NODEMCU WIFI Module from the category Modules | Display/LED.Feature:Every ESP8266 pin is broken down.Single line support, 12 digital pin write/read/interrupt/pwm, and I2C. (except D0)lone analogue input0.96" OLEDUSB Micro Interfacesuitable for use with Arduino, NodeMCU, and..
This is 0/4-20mA to 0-3.3V 5V 10V Voltage Transmitter from the category Modules | Converter/Ethernet.1. The module is attached in accordance with the definition, and the supply voltage ranges from 7 to 36 volts (if the output is to 10V, the supply voltage must be greater than 12V)2. The D2 light sho..
This is 1 Channel 5V Infrared Remote Control Relay Module from the category Modules | Relay.1. If wired properly, the LED light turns on after 5 seconds, and the module and relay function as intended.2. By pressing S1, you can turn on or off the relay.Remote control educationThere are two operationa..
This is 1 Channel LED Digital Time Delay Relay Module With Acrylic Case from the category Modules | Relay.Product specifications:1.Operating Voltage: 6-30V; 5V microUSB power supply supported2. High level trigger as the trigger source (3.0V-24V)3: The devices output can be either a DC 30V 5A or a 22..
This is 1 Channel MOSFET Switch IRF540 Isolated Power Module from the category Modules | Wireless.1. Frequently employed in circuits that call for electronic switches, such as dimming lights, switching power supply, and motor drives.2. Suitable for controlling DC circuits rather than AC circuits, su..
This is 1 Channel Relay Module For D1 Mini from the category Modules | Relay.Product specifications: 1.Supporting use of D1 MINI2. Compatible with Arduino and uses the Arduino IDE for programmingPin 3.11XI/Opin 4.1XADC (input 0-3.3V)5. Offer online OTA supportSize of the item: 27.6 mm by 25.8 mmPack..
This is 1 Way 10A High-level Expansion Relay Module from the category Modules | Relay.one relay moduleThe control area, load area, and contact points all meet the climbing distance standards;Relay activity indication includes both bright and dark states;It can be used to operate home appliances and ..
This is 1-3000MHz 2.4GHz 20dB 32dB 64dB LNA Low Noise Amplifier Module from the category Modules | Power.DC12V (current 75mA) power supply with a shielded casing50 Ohm is the input/output impedance.Maximum output power: 19.5dBm (at a 50-ohm load and 2 VPP).Input signal: 0 DBM (>0 DBM Input, distorte..