60*50mm Hot Bed Power Module Expansion MOS Tube | 3D Printer | Boards

This is 60*50mm Hot Bed Power Module Expansion MOS Tube from the category 3D Printer | Boards.

Features:

powered heated bed module

built on the potent MOSFET HA210NO6

60 mm by 50 mm

For M3 screws, mounting holes are 3.2mm in diameter.

54*43mm is the distance between holes.

Strong MOSFET can tolerate higher current than typical RAMPS or other 3D printer controllers can.

12 to 24 volts

Under the assumption of proper cooling, it operates steadily when I(Max)=25A, and while the process is running, the current cannot be greater than 25A.

Included in the package is one (1) Hot Bed Power Module.