Micro SD TF Card Memory Module | Sensors | Memory/Sensor

This is Micro SD TF Card Memory Module from the category Sensors | Memory/Sensor.

Specification:

1. It is compatible with Micro SD and Micro SDHC cards

2. A standard interface is the communication interface.

3. Easy to install using a 4 M2 screw placement hole

4. Power source: 4.5 to 5.5 V

5.2 to 200 mA of current

Interface level: 3.3 or 5 volts

7. Supported Cards: Micro SD card (=2G),

32GB Mirco SDHC card

Size: 42 x 24 x 12 mm

9. Pounds: 7g

Features:

Support for Micro SD and Micro SDHC cards (high-speed card)

2. The 5V or 3.3V level conversion circuit board can interface levels.

3. The communication interface uses the SPI standard.

4. Control Interface: Six pins altogether (GND, VCC, MISO, MOSI, SCK, CS),

to the ground,

5. The power source is VCC, the bus is MISO, MOSI, SCK, and the chip is CS.

choose the signal pin;

6. 3.3V regulator circuit: LDO regulator output