This is 27MHZ Two-way Remote Control Module from the category Sensors | Memory/Sensor.27 Hz is the signal frequency.Power supply voltage: It can be powered by two No. 5 battery boxes, and the transmission and receiving voltages are both 3V.The positive electrode is connected to B+, the negative elec..
This is 433/315MHZ Wireless Receiving and Transmitting Module from the category Sensors | Memory/Sensor.Product details and usage guidelines for the transmitter head and receiverreciever module settingsModel of the Goods: MX-RM-5VDC5V for operation; 4MA for idle current433.92MHZ is the receiving fre..
This is APDS-9930 Gesture Proximity Module from the category Sensors | Memory/Sensor.Ambient Light Sensing (ALS) Approximates Human Eye Response Programmable, ALS, IR LED, and Proximity Detector in an Optical Module Function Interrupted by Upper and Lower Threshold16-Bit Maximum ResolutionLow Lux Pe..
This is AT24C256 I2C EEPROM Storage Module from the category Sensors | Memory/Sensor.1. An 8P-chip carrier onboard that can accommodate AT24C256 series chips;2. On-board power indicator and pin power supply;3. an on-board pull-up resistor is necessary for I2C communications;4. Direct jumper settings..
This is Button Light Touch Switch Module from the category Sensors | Memory/Sensor.Size: 24 x 31 mmRed, yellow, green, blue, black, and white are the colours.3.5V-5V is the working voltage.Otput: Electronic level (press low level, release high level)SVG interface for the Arduino 3Pplatform: Raspberr..
This is Collision Sensor For Robot from the category Sensors | Memory/Sensor.board for expanding sensors with portsWhen touched, produce a low level, and when released, maintain a high level.Robot collision detection and contact collision detection are also possible uses.List of packages: 1 Robot Se..
This is Collision Switch Module from the category Sensors | Memory/Sensor.1. The module installation is in front of a collision, the module output is low, a collision does not occur, and the output is high.2. The module has M3 mounting holes for simple installation in a small automobile.3. Module si..
This is EM4100 125khz RFID ID Card from the category Sensors | Memory/Sensor.Descriptions:Composition: ABSSize in MM: 35*28*7Type of chip: EM4100Response: 125 KHz, operation Climate: -40 to 85 °CBaggage list:A style confirmation is required before placing orders.Note: Import Dukan Purchase Directly ..
This is Five-way Flame Sensor from the category Sensors | Memory/Sensor.Product attributes:1: Wide detection range, 5-way flame sensor design (ordinary single flame sensor detection range is about 30 degrees, with the increase of distance, the range gradually decreases, the detection range of this p..
This is GY-9960-3.3 APDS-9960 RGB Infrared Gesture Sensor from the category Sensors | Memory/Sensor. The RGB and Gesture Sensor is a compact breakout board with an integrated APDS-9960 sensor that may be used for proximity detection, touchless gesture sensing, and ambient light and colour measuremen..
This is HC-SR505 Mini Infrared Motion Sensor from the category Sensors | Memory/Sensor.1. Pounds: 6g2. DC4.5–20V operating voltage range3. A 60uA static current4. High output level 3.3v / low 0v5. The trigger: a recurring trigger (default)6. Delay time: standard 8S plus -30% (may be adjusted to be b..
This is HTTM Capacitive Touch Switch from the category Sensors | Memory/Sensor.Voltage range for use: 2.7 to 6V30 + 70 °C as the working temperatureOut pins output voltage is + 3.3V 0.1V.Output pins 500mA output currentThe features of HTTM series touch key modules include:1. Lack of mechanical compo..