Matek PDB-XT60 with BEC 5V&12V

The Matek PDB-XT60 with BEC 5V and 12V Power Distribution Board was designed to offer the best performance and dependability possible in a 36x50mm, 4-layer PCB. It has an XT60 for simple LiPo battery hookup.

In addition to providing synchronised and regulated DC 5V outputs for RC Receivers, Flight Controllers, OSD, and Servos, it distributes power from 34S LiPo packs to 6 ESCs via BECs.

Additionally, it offers linearly controlled DC 12V for lighting up LEDs, servos, RC receivers, flight controllers, cameras, and other devices. It has an XT60 socket for easy LiPo pack connection.

Features:

• 4-layers and 1.6mm PCB
• Integrated XT60 Socket
• For H or X type frames, there are a total of 6 pairs of ESC solder tabs.
• 5V and 12V Output LED markers
• regulated outputs for 5V and 12V
• BEC 5V output: 5V/2A (maximum 2.5A, 10 s/min).
• 40mV output ripple (VIn=16V, VOut=5V at a 2A load)
• Tolerant to short circuits: 5 seconds per minute
• BEC 12V output: 12V/500mA (max.0.8A 5s/minute) (4S LiPoly, 13–18V DC)
• 3S LiPoly voltage at BEC 12V output: =3S LiPoly voltage - 1V

Note: Import Dukan Will Import Your Product Directly From Manufacturer and Deliver to you without any extra charge of custom clearance or shipping. We are directly purchasing and delivering to you hence We are able to provide Lowest rate and Standard Quality.