SOP8 IC Test Clips | Tools | Test/Weld/Assemble

This is SOP8 IC Test Clips from the category Tools | Test/Weld/Assemble.

Specifications:

Test connector type Clip

pin configuration: SOIC/SOP8

The clip cannot be read out under normal voltage when a programmer with protected function is encountered. A voltage of 3.3V should be applied at this point.

The procedure is to clamp the chip and supply a 3.3 V voltage to the clip that corresponds to the chips 8th pin. 3.3V power supplies typically have two wires, therefore VCC should be connected to a clamp and the other wire should be grounded directly.

packing note: Before placing purchases, please double-check the style.