CP2102 USB 2.0 To TTL UART Connector Module | Sensors | Serial/Converter

This is CP2102 USB 2.0 To TTL UART Connector Module from the category Sensors | Serial/Converter.

1. After installing a driver, the primary chip, CP2102, creates a virtual serial port.

2. USB power, signal pin level is 3.3V, positive logic, GND, TX, Rx, 3.3V ( 40mA), and lead out interface.

3. After the driver is properly installed, the on-board status indicator and transceiver indication will turn on. When communicating, the transceiver indicator will blink. The brightness decreases as the baud rate increases.

4. Allows for baud rates of 300 BPS to 1 Mbps.

5. Support for communication format: 5,6,7,8 data bits, 1,1.5,2 stop bits, and checks for odd, even, mark, space, and none are supported.

Supported operating systems include Linux, Mac OS X, Windows Vista, XP, Server 2003, and OS 200. Male USB heads can be connected to USB ports directly.