This is 42BYGH34 Nema17 0.32Nm 1.8Degrees Double Shaft 42 Stepper Motor from the category 3D Printer | Motor/Stepper Motor.Phase / Current: 6AStep Angle: 1.8 degrees Phase: 2Type: Holding Hybrid 2.0 N.m of torqueOne (1) 42BYGH34 Nema17 Double Shaft Motor is included on the packing list.Note: Import ..
This is 42BYGH40-1704A Stepper Motor from the category 3D Printer | Motor/Stepper Motor.Parameters: 1.8 degree stepPositional precision: z5%Resistance precision: 10%Accuracy of inductance: 20%80 C maximum temperature riseTemperature range: -10°C to +40°CInsulation resistance: 500VDC at 100MQ minimum..
This is 42BYGH47-1704B Stepper Motor from the category 3D Printer | Motor/Stepper Motor.Specification:the 42BYGH47-1704B modelPower: 12VHeight of body: 47mmD-axis Rront axle length: 20mm, shaft diameter: approximately 5mm.Rear socket type: 10mmTwo-phase, four outlets (Black A + Green A / Red B + Blu..
This is 42HB34F08AB Stepper Motor from the category 3D Printer | Motor/Stepper Motor.Specifications:Power rating: 200 (W)2-phase hybrid stepping motors are the product kind.Typical voltage: 220 (V)Current rating: 1.7 (A)Speed range: 0-900 (RPM)3.5 rated torque (nm)packing note: Before placing purcha..
This is 4632-370 Micro Worm Reduction Gear Motor with Self-locking from the category 3D Printer | Motor/Stepper Motor.Power: 12VVersion: N20Axle diameter: 6 mm; axial length: 18.5 mmMetal as a materialpackage contains:A style confirmation is required before placing orders.Note: Import Dukan Purchase..
This is 57BYGH76 Nema23 Stepper Motor 1.8 Degree 4.2A 1.8Nm from the category 3D Printer | Motor/Stepper Motor.Phase count: 2 Phase 4-wires.Phase current rating: 2.8A.1.0? is the phase resistance.5.0 mH of phase inductance.1.8o step angleShaft Diameter: D-Shape, 8.00mm.Voltage range: 12 to 24 volts ..
This is DMA860H 2-phase Digital Stepper Motor Driver from the category 3D Printer | Motor/Stepper Motor.1) Can drive 4, 6, or 8 lines of two-phase stepper motors2) 18-80Vac for the voltage input range3) Maximum current: 7.2A; resolution: 0.1A4) 400–51200 is the subdivision range.5) Differential/sing..
This is GA12-N20 DC 3V/6V/12V N20 Metal Gear Motor from the category 3D Printer | Motor/Stepper Motor.DC 3V, 6V, and 12VMetal as a materialVersion: N2015/30/50/60/100/200/300/500/1000RPM: Revolving Speed36mm in total lengthMotor Dimensions: 12 mm x 26 mm (height)Size of Shaft: 3mm (diameter) x 10mm ..
This is NEMA 17 42 Stepper Motor 17HS4401 from the category 3D Printer | Motor/Stepper Motor.Descriptions:There are two phases.1.8° step anglevoltage specified: 3.3V DCCurrent rating: 1.5A400 mN. m Min. holding torque (two-phase energization)Resistance to phases: 2.22 soil 10% (20C)Phase inductance:..
This is Nema 17 42 Stepper Motor With 300MM T8 Lead Screw from the category 3D Printer | Motor/Stepper Motor.
General Information:
Accuracy of step angles: +/- 5% (full step,not load)
Precision for resistance: +/- 10%
Accuracy of inductance: +/- 20%
Temp. rise: 80 degrees maximum (rat..
This is Nema 17 42 Stepper Short Fuselage Motor 0.09Nm 1.8 Degree OK42STH22-0804AC from the category 3D Printer | Motor/Stepper Motor.Specification:Phase / Current: 0.8 ampStep Angle:1.8 degreesModel Number: Ok42sth22-0804ac Type:Hybrid9 mN.m of holding torqueList of contents: 1 * OK42STH22-0804AC M..
This is Nema17 17HS4023 4-Lead 22Mm 42 Stepper Motor for Titan Extruder from the category 3D Printer | Motor/Stepper Motor.120 mN.m Holding torqueType:Titan hybrid step motorSecond PhasePower: 12V0.7 A/Phase at the momentResistance per phase: 4.0 10%Inductance: 3.2 mH/Phase 20%14 N.cm Holding Togque..