153 Plastic Strip | Accessories | Wood/Plastic Board

This is 153 Plastic Strip from the category Accessories | Wood/Plastic Board.

Small hole requirements:

This plastic strip can be used on a 2 mm shaft; through holes have an aperture diameter of 2.05 mm; impervious holes have an aperture diameter of 1.95 mm; and the distance between all consecutive through holes is 1.95 mm. It is 10mm in diameter and has through holes scattered throughout with impermeable holes:

(1) There are two impermeable holes in the middle of the adjacent through holes on the front of the plastic strip, making the space between the holes 3.333mm apart;

(2) The spacing between adjacent holes on the reverse side of the plastic strip is 5mm, with one impermeable hole located in the centre of the adjacent through holes;

(3) In