Brand: Import Dukan
Model: ID-01-053
This is a USB 3.1 Type-C 24pin Male Adapter Board, that supports the latest computer/Tablet/Mobile Phone/Hard Disk Drive devices with Type C for charging and data transfer. It has a USB C Male Socket connector mounted on the DUAL side PCB board with all 24 pins broken out to solder point with 12 pin..
₹69
Brand: Import Dukan
Model: ID-01-285
This is a USB 3.1 Type-C Female Socket with Board, that supports the latest computer/Tablet/Mobile Phone/Hard Disk Drive devices with Type C for charging and data transfer.
Features:
Type: Female
V： Positive power supply
D -：Data negative
D+：Data positive
G： Negative power supply
..
₹21
Brand: Import Dukan
Model: ID-01-917
USB Adapter Board is a simple interface converter. It includes a 4P terminal, Micro USB female, Types A USB male, and Type A USB female. It can achieve mutual conversion between these four interfaces. It can be used as a voltage interface converter or as a data interface converter.
Features:
..
₹35
Brand: Import Dukan
Model: ID-01-942
The USB ASP AVR Programming Device for ATMEL processors is a USB in-circuit programmer for Atmel AVR controllers. USB ASP AVR Programming Device for ATMEL Processsors simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver; no s..
₹168
Brand: Import Dukan
Model: ID-01-908
The USB-Blaster drives configuration or programming data from the PC to configure or program Altera devices.
ALTERA USB Blaster Support AS, PS, and JTAG program, Support embedded logic analyzer function of SignalTapII and NIOS II communication and debugger — When you use it to debug your Black Go..
₹197
Brand: Import Dukan
Model: ID-01-920
The Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm Connects speed-critical devices, such as external hard drives and smartphones, and peripherals that require a Mini-B connection to your computer.
Constructed with corrosion-resistant, gold-plated connectors for optimal signal clarity a..
₹21
Brand: Import Dukan
Model: ID-01-919
USB A to B Cable for Arduino UNO and MEGA Boards. It is also called a printer cable that is used in printers. These cables are used to connect our Arduino UNO or Arduino MEGA Boards to flash our code.
Features:
Type: USB Type-A to Type-B Connector
Length of cable: 30cm
Fully compatible ..
₹26
Brand: Import Dukan
Model: ID-01-976
USB Charger Doctor to measure the working voltage and current output for any USB port and project. This blue plastic dongle plugs between a USB device and passes the data lines through. There’s a 0.05-ohm resistor in line with the power pin that is used to measure the current draw.
The Doctor’s d..
₹85
Brand: Import Dukan
Model: ID-01-954
Fixed 5V Output Boost Regulator (step-up regulator) Module with standard USB Connector.
Accepts Input voltage from 0.9V to up to 5V.
Features:
On-board CE8301 Chip
Input voltage: 0.9V-5V DC
PFM Control DC-DC Converter
Transfer efficiency: 96%(max)
With USB port
With worki..
₹30
Brand: Import Dukan
Model: ID-01-912
This is a USB 2.0 female connector. It is very useful if you want to link a project with a USB connector for the power supply or data exchange. Standard size USB 2.0 socket mounted on a small PCB. No delicate soldering is required. This USB connector can be easily attached to your projects.
Featu..
₹21
Brand: Import Dukan
Model: ID-01-857
USB Host Shield compatible with Arduino is based on the MAX3421E, which is a USB peripheral/host controller containing the digital logic and analog circuitry necessary to implement a full-speed USB peripheral or a full-/low-speed host compliant to USB specification rev 2.0.
It is compatible with ..
₹772
Brand: Import Dukan
Model: ID-07-516
This simple board breaks out a micro-B USB connector's. If you want to add the increasingly popular micro-B USB to your project, but don't want to put up with soldering the tiny connector, this is the board for you. MICRO USB (5-pin, B type, female connector ) to DIP (2.54mm pin pitch).
Package ..
₹9
