Menu
Your Cart

Raspberry Pi hdmi display

Raspberry Pi hdmi display
Brand: Import Dukan Model: ID-01-365
This is an Aluminum Heatsink used for cooling the chips on Raspberry Pi. A heat sink is designed to maximize its surface area in contact with the cooling medium surrounding it, such as the air. A heat sink transfers thermal energy from a higher temperature device to a lower temperature fluid medium...
₹9
Brand: Import Dukan Model: ID-01-357
Aluminum Heatsink kit is used for cooling the chips on Raspberry Pi. Comparing to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently. Besides, the installation is simple, what you need to do is to remove the heatsink p..
₹18
Brand: Import Dukan Model: ID-01-314
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera for a different size. Works great, just carefully open the connector on the Pi and slip this one in. Features: compatible with classic or NoIR type raspberry camera Color: White - Blue Length: 15..
₹23
Brand: Import Dukan Model: ID-01-324
Tried connecting a 3.3V device to a 5V system, or the other way around? You should know the challenge it takes. the bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and..
₹24
Brand: Import Dukan Model: ID-01-359
This is a Black Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. Comparing to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.  This heatsink has an adhesive film on the back. It is very easy to mou..
₹26
Brand: Import Dukan Model: ID-01-364
This is a Golden Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. It has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.  The heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just re..
₹27
Brand: Import Dukan Model: ID-01-363
This is a Green Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. It has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.  The heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just rem..
₹29
Brand: Import Dukan Model: ID-01-323
This module is 5V to 3.3V TTL Bi-directional Logic Level Converter Module. 2-channel of high-voltage logic switch low voltage logic into unitary transformation.2 channels of high-voltage logic and low-voltage logic bilateral switching,  This Module is compatible with the breadboard, it can be put on..
₹30
Brand: Import Dukan Model: ID-01-313
Flex Cable will let you swap out the stock 300mm long flex cable from a Raspberry Pi Camera for a different size. Works great, just carefully open the connector on the Pi and slip this one in. Features: Easy to use. Easily replaceable. Applications: Displays, PC and Computers, ..
₹31
Brand: Import Dukan Model: ID-01-362
This is a Blue Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. It has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.  The heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just remo..
₹36
Brand: Import Dukan Model: ID-01-312
Flex Cable will let you swap out the stock 500mm long flex cable from a Raspberry Pi Camera for a different size. Works great, just carefully open the connector on the Pi and slip this one in. Features: Easy to use. Easily replaceable. Applications: Displays, PC and Computers, ..
₹41
Brand: Import Dukan Model: ID-07-420
5V 4010 Cooling Fan is a small but powerful fan. The cooling fan finds its use as an exhaust fan on the Raspberry pi case. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance. it's also compatible with raspberry pi. The cooling fan operate..
₹43
Brand: Import Dukan Model: ID-01-368
This is a Black Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. Compared to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.  This heatsink has an adhesive film on the back. It is very easy to moun..
₹56
Brand: Import Dukan Model: ID-06-602
12 V 4010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance.  The cooling fan operates on a 12V DC power supply which can be easily powered from the RPI board. It has a 2 pin connector to easily c..
₹58
Brand: Import Dukan Model: ID-01-325
This camera cable is a 30cm ribbon cable that is best compatible with Raspberry Pi Zero V1.3 and Raspberry Pi Zero W. All you need to do is just plug the camera cable into your Raspberry Pi Zero’s CSI port and then the other end into the raspberry pi camera module board. Features: Cable Len..
₹60
Brand: Import Dukan Model: ID-04-521
This camera cable is for Raspberry Pi Zero and allows the Raspberry Pi board for imaging capabilities. This Raspberry Pi camera cable is 150mm in length and is suitable for the CSI ports on the Raspberry Pi Zero board. The camera cable is a flexible ribbon cable and can easily be swapped in and out...
₹65
Brand: Import Dukan Model: ID-06-604
12V 3010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance.  The cooling fan operates on a 12V DC power supply which can be easily powered from the RPI board. It has a 2 pin connector to easily co..
₹66
Brand: Import Dukan Model: ID-06-605
5V 3010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance. This fan can be directly connected to Raspberry Pi pins 4 and 6. The cooling fan operates on a 5V DC power supply which can be easil..
₹69
Brand: Import Dukan Model: ID-06-603
5V 3007 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance.  The cooling fan operates on a 5V DC power supply which can be easily powered from the RPI board. It has a 2 pin JST connector to easily ..
₹91
Brand: Import Dukan Model: ID-01-356
Raspberry Pi 4 Case is made of strong ABS plastic material with a Red-White combination and meticulously designed for Pi 4. It will provide adequate protection for your Pi and access to all the ports. This case comes with a Raspberry LOGO engraved on the white top of the cover and Rubber pads at the..
₹98
Brand: Import Dukan Model: ID-01-354
Raspberry Pi Zero Case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a plain lid, a GPIO lid, and a camera lid. It also comes with an exclusive short ribbon cable that will connect your camera module to your Raspberry Pi..
₹107
Brand: Import Dukan Model: ID-01-304
The official red and white enclosure from the Raspberry Pi foundation, specially designed for the Raspberry Pi 3 Model B and Model B+. The versatile design is simple to assemble and allows easy access to all the Raspberry Pi ports and controls without leaving it unprotected. Features : ..
₹121
Brand: Import Dukan Model: ID-01-309
Flex Cable for Raspberry PI Camera is a replacement for the original Raspberry Pi Camera Cable or 15P CSI Cable. It comes with connectors on both ends and works with Raspberry Pi 3, 4, and other models with 15P CSI Connectors.  Features: Easy to use. Easily replaceable. Applications: Di..
₹133
Brand: Import Dukan Model: ID-01-303
This Transparent case designed for the Raspberry Pi 2 B and Model B+(B Plus) to give you maximum use of the Raspberry Pi, it provides openings for all the connectors( 3.5mm Audio / Micro USB Power / HDMI Video / Ethernet/ 40 Pin GPIO/ DSI/ USB ports) and comes with four screws that will keep the cas..
₹133
Brand: Import Dukan Model: ID-01-321
Night Vision Infrared LED 3W for Raspberry Pi Camera is the additional focus that can be added to your night vision surveillance camera project using Raspberry Pi. The Night Vision Sensitive Infrared Light 3W for Raspberry Pi Camera features the Onboard photoresistor for ambient light detection. Als..
₹159
Brand: Import Dukan Model: ID-01-366
The Raspberry Pi prototype HAT Breadboard can provide a good prototype development platform. You can combine the function of the Raspberry Pi GPIO pin to achieve many different functions, you can build an electronic experiment environment. Features: Easy to Assemble. Prototyping HAT for R..
₹163
Brand: Import Dukan Model: ID-01-311
Flex Cable will let you swap out the stock 1m long flex cable from a Raspberry Pi Camera for a different size. Works great, just carefully open the connector on the Pi and slip this one in. Features: Easy to use. Easily replaceable. Applications: Displays, PC and Computers, Fla..
₹166
Brand: Import Dukan Model: ID-01-315
This 5mp camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi. Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian and you are good to go. The board itself is tiny, ..
₹233
Brand: Import Dukan Model: ID-01-310
This is a high-quality universal GPIO extension board compatible with Raspberry Pi 2/ 3 Model B making working easier because of its multi-functional module. You can simply click on them to insert a wire into them, it includes all the mounting hardware required to fix the board to your Raspberry Pi...
₹255
Brand: Import Dukan Model: ID-01-322
OV5647 Wide Angle Fish-Eye Lens Night Vision Camera for Raspberry Pi is a 5MP Night vision camera module. This is a 130° fish-eye wide-angle camera for Raspberry pi 2 Raspberry pi 3B and 3B+.  Features: The Raspberry Pi Camera Board features a 5 megapixels Compatible with Raspberry Pi 2, ..
₹604
Brand: Import Dukan Model: ID-01-330
ENC28J60 Ethernet Module is a board that contains an Ethernet port. The board is based on Microchip’s ENC28J60 integrated circuit and it can be used to provide internet connectivity to Raspberry Pi zero over Ethernet. It utilizes the new SSOP 12 package Microchip ENC28J60 Stand-Alone Ethernet Con..
₹708
Brand: Import Dukan Model: ID-01-360
Raspberry Pi camera, compatible with any version of Raspberry Pi Support infrared night vision Support focus adjustment, adjust according to the distance of the incoming object 5megapixels Photosensitive chip OV5647 Package Includes: 1 x Raspberry Pi 4B/3B+/Zero/WH Infrared Focus A..
₹1,099
Showing 1 to 32 of 32 (1 Pages)

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments