5 V 1 A Power Adapter takes an AC INPUT of 100-240V and gives 5V 1A DC output
Features:-
Excellent Quality
Short Circuit, Over Voltage & Over Current Protection
Incredibly Low Fault Rates
No Minimum Load
This power supply is a regulated Center Positive power supply
It's plug desig..
This battery is a rechargeable battery that is generally used for the DIY Project and in industries.
Application:
Emergency Lights
Solar Lighting / Led Lighting
Telecom
Electronic Weighing Scales
Package Content:
1 x battery
Note: this product dispatched after check hence i..
It is used to connect a 9V battery to the application. This snap power cable to DC 9V clip male line battery adapter for mostly used to power Arduino boards.
The connector comes with open wire at one end and battery connector at another end. It is very good practice to use such connector in the p..
9V Battery Snap Connector to DC barrel jack adapter
This connector is useful when you need to power some board using a 9V battery but that board has only a 2.1mm DC barrel jack to power it up. One can use this adapter to power up any DC barrel jack-based power connector using a standard 9V batte..
This Li-Ion 18650 3.7V 2000MAH Battery gives value for your money. It is a single cell, compact, and powerful battery cell with 2000 mAh capacity. It is very convenient to install in your project to fulfill a 3.7 Volt requirement with high capacity.
The battery terminals can use in any compatible..
This Li-Ion 18650 3.7V 2600MAH Battery gives value for your money. It is a single cell, compact, and powerful battery cell with 2600 mAh capacity. It is very convenient to install in your project to fulfill a 3.7 Volt requirement with high capacity.
The battery terminals can use in any compatible..
This Li-Ion 18650 3.7V 2200MAH Battery gives value for your money. It is a single cell, compact, and powerful battery cell with 2200 mAh capacity. It is very convenient to install in your project to fulfill a 3.7 Volt requirement with high capacity.
The battery terminals can use in any compatible..
This is an LM2596 DC-DC step-down converter with the high-precision potentiometer, capable of driving a load up to 3A with high efficiency, which can work with an Arduino nano, Arduino UNO, other mainboards and basic modules. When the output current keeps greater than 2.5A (or output power greater t..
This XL4016E1 200W step-down power supply module has a voltage rating of 4-40VDC up to 1.25-36VDC. It is rated at a maximum power output of 200W. An external fan can be added to the heatsinks to increase the output current to 8A.
Features:
Method of adjustment: First, adjust the input power..