Brand: Import Dukan
Model: C-1047
This is 2CH RC Remote Control 27MHz Circuit PCB Transmitter and Receiver Board with Antenna Set. The two buttons on the launch board can control the voltage to be 1-3V and the motor is reversing.
Features:
Type: Two-way remote control
Antenna length: 26cm
To improve the remote control s..
₹105
Brand: Import Dukan
Model: ID-01-359
This is a Black Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. Comparing to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
This heatsink has an adhesive film on the back. It is very easy to mou..
₹26
Brand: Import Dukan
Model: ID-01-362
This is a Blue Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. It has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
The heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just remo..
₹36
Brand: Import Dukan
Model: ID-01-364
This is a Golden Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. It has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
The heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just re..
₹29
Brand: Import Dukan
Model: ID-01-363
This is a Green Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. It has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
The heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just rem..
₹29
Brand: Import Dukan
Model: ID-01-269
3×1 Matrix Membrane Switch Keypad features a total of 3 buttons in Matrix form. This is a membrane keypad with no moving parts. A female 4-pin berg connector is required for interfacing it with your microcontroller circuits. A simple way to mount the keypad in a variety of applications, as it has an..
₹62
Brand: Import Dukan
Model: ID-01-004
This is a 3 pin JST XH Male connector. This connector connects wires to a board. It is a disconnectable connector in the crimp style. It is an entry-level model.
The wires must be crimped to the terminal before being inserted into the female connection and attached to any board's male connector. ..
₹1
Brand: Import Dukan
Model: C-1117
3 Pin NTC Thermistor Module is a temperature sensor module that senses the temperature of the surrounding environment by the thermistor and converts it into a digital and analog output. The thermistor is the short form of thermal resistance and its resistance increases and decreases in the proportio..
₹23
Brand: Import Dukan
Model: ID-01-667
This PCB Mounted Passive Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switching it on and off at different frequencies either using delays or PWM.
This module is ideally suited to adding noise to your projec..
₹38
Brand: Import Dukan
Model: ID-01-250
Mini DC-DC Boost Step-Up Converter Board Module, 3.7V to 12V A DC-DC Boost step-up converter module is used to increase the voltage and has output voltages of 5V, 8V, 9V, and 12V. The voltage boost converter module produces a consistent 3.7V DC voltage at a range of input voltages between 3.7V and 1..
₹46
Brand: Import Dukan
Model: ID-01-313
Flex Cable will let you swap out the stock 300mm long flex cable from a Raspberry Pi Camera for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
Features:
Easy to use.
Easily replaceable.
Applications:
Displays, PC and Computers, ..
₹31
Brand: Import Dukan
Model: C-1189
It is possible to get changeable output voltage ranges between 1.2V and 36V using the 300W 20A DC-DC Step-down Adjustable Constant Current Module. The module has several current output ranges up to 20 A. It is easy possible to operate high power applications continuously with the heat sink fitted (p..
₹469
