Brand: Import Dukan
Model: C-1120
KA2284 Power Level Indicator Battery Pro Audio Level Indicator Module can be used for battery charge level indicator (DC) or audio level indicator (AC), AC and DC signals can be controlled by jumper. There are four onboard battery indicator light-emitting diodes (LEDs), three types of color display,..
₹66
Brand: Import Dukan
Model: C-7515
KY-010 Photo Interrupter Module for Arduino will trigger a signal when light between the sensor's gap is blocked.
KY-010 Photo Interrupter module consists of an optical emitter/detector in the front and two resistors (1 kΩ and 33 Ω) in the back. The sensor uses a beam of light between de emitter..
₹30
Brand: Import Dukan
Model: ID-07-835
The KY-022 is equipped with three pins. It responds to a frequency of 38kHz at 940nm. This signal is sent via the digital output. If an IR signal is detected, the LED module on board will light up. This sensor module can be used to decode remote controls for home theaters and other remote controls t..
₹17
Brand: Import Dukan
Model: C-5936
Introducing the KY-024 Digital Magnetic Linear Hall Sensor, a small, multipurpose sensor that can accurately detect magnetic fields. This sensor provides precise readings for a range of applications by utilizing Hall effect technology.
When searching for a dependable and small sensor for magnetic..
₹34
Brand: Import Dukan
Model: ID-01-530
Finger Detection Heartbeat Measuring Sensor Module uses a bright infrared LED and a phototransistor to detect the pulse of the finger, a red LED flashes with each pulse. This component is ideally suited to adding heartbeat sensing to your project.
The most important is to keep the shield str..
₹21
Brand: Import Dukan
Model: ID-04-517
L293D Motor Driver module is compatible with ESP12E Dev Kit and NodeMCU. This shield board is driven by the power full-bridge chip L293D which can directly drive 2-channels DC motors or one-channel stepper motor.
In this motor shield board, the IO port of ESP-12E Dev Kit is used as the control po..
₹123
Brand: Import Dukan
Model: ID-05-262
The L9110 Fan Module is an integral component designed for fire extinguishing robots, utilizing a dual H-bridge motor driver to control fan operation efficiently. Housed in a compact DIP (Dual Inline Package) format, it ensures easy integration and robust performance in firefighting scenarios. The m..
₹98
Brand: Import Dukan
Model: ID-01-123
Smart Electronics LAN8720 Network Module Ethernet transceiver RMII interface development board for Arduino. The network module communicates with the Arduino type board through the SPI protocol ideal for projects with ARDUINO, PIC, AVR, STM32.
Features:
High-Performance 10/100 Ethernet Physi..
₹197
Brand: Import Dukan
Model: ID-01-138
Laser Non-Modulator Tub Laser Receiver Module gives the output of laser receiver in digital format and output pin is high when LASER is detected and low when LASER is not detected. It is for Raspberry Pi and Arduino to receive the laser output and decode digital data.
Features:
Small in siz..
₹56
Brand: Import Dukan
Model: ID-05-333
The LCUS-1 PLC USB Serial Control Relay Module is a versatile and efficient solution for remote relay control applications. Featuring seamless integration with PLC systems and USB connectivity, it offers convenient control and monitoring capabilities. With its compact design, it fits seamlessly into..
₹225
Brand: Import Dukan
Model: ID-01-623
This is LED Strips and LED Controller with Y-cable Set, the light can be controlled via the transmitter or the button on the LED controller, the controller remembers the last setting when power on. It makes any model look brighter and realistic. You can also adjust the different flash patterns of fl..
₹503
Brand: Import Dukan
Model: ID-01-163
The LIS3DSH has dynamically selectable full scales of ±2g/±4g/±6g/±8g/±16g and is capable of measuring accelerations with output data rates from 3.125 Hz to 1.6 kHz. LIS3DSH is an ultra-low-power high-performance three-axis linear accelerometer belonging to the “nano” family with an embedded state m..
₹96
