IRFZ44N Power MOSFETIRFZ44N is an advanced HEXFET Power MOSFETs that utilizes advanced processing techniques to achieve extremely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that exFAT power MOSFETs are well known for, provide..
JRC4558 JRC4558D 4558 DIP-8 IC is a high-performance monolithic dual-operational amplifier.
Features:
It is available in the 8-Pin DIP and SOP Package.
It is applied in portable instrumentation and Intrusion Alarm Systems.
It produces an output signal that is much larger than the potent..
The 10A1000V KBPC1010 Rectifier Bridge is a robust electronic component designed for converting alternating current (AC) into direct current (DC) with efficiency and reliability. With a maximum current rating of 10 amps and a voltage rating of 1000 volts, this bridge rectifier is suitable for variou..
L293D Stepper Motor Driver IC is a dual H-bridge motor driver integrated circuit (IC). Motor drivers act as current amplifiers since they take a low-current control signal and provide a higher-current signal. This higher current signal is used to drive the motors.
Features:
..
The LM2576 is a voltage Regulator IC, it uses the Buck-converter topology to step-down and regulates higher level voltage values to a lower level. It is of non-sync type and can take in an input voltage 40V maximum and source an output current of 3A maximum with a peak efficiency of 90%.
App..
DESCRIPTION:-
The LM317 device is an adjustable three-terminal positive-voltage regulator capable of supplying more than 1.5 A over an output voltage range of 1.25 V to 37 V. It requires only two external resistors to set the output voltage. The device features a typical line regulation of 0.01% ..
LM324 is a 14pin IC consisting of four independent operational amplifiers (op-amps) compensated in a single package. Op-amps are high gain electronic voltage amplifier with a differential input and, usually, a single-ended output. The output voltage is many times higher than the voltage differe..
DESCRIPTION:-
This IC LM358 is 8-pin IC. These devices consist of two independent, high-gain frequency-compensated operational amplifiers designed to operate from a single supply or split supply over a wide range of voltages. Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensin..
LM358 is a dual op-amp IC integrated with two op-amps powered by a common power supply. It can be considered as one half of LM324 Quad op-amp which contains four op-amps with common power supply. The differential input voltage range can be equal to that of the power supply voltage. The default ..
DESCRIPTION:-
The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. The current drive to the LEDs is regulated and programmable, eliminating the need ..
The LM393 is a dual differential comparator; this means that it accepts 2 inputs for comparison. It compares these voltage inputs and determines which is the larger value. Based on this, electronic decisions can be made based on which input is greater and which is smaller. Thus, a comparator is..
DESCRIPTION:-
This IC 741 is 8 pins Operational Amplifier. The LM741 series are general-purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in replacements for the 709C, LM201, MC1439, and 748 in most applications.
..