All other 3D printer related products.
Brand: Import Dukan
Model: ID-06-223
MXD1230 12mm 650nm 5mW Red Line Laser Module with an adjustable focus point. It can be used to connect diode tubes for multiple uses.
Features:
Laser Type: Red CROSSLINE Laser
Easy to install, durable, and portable
The Focus line’s Intensity can be adjusted with the help of a lens ring ..
₹128
Brand: Import Dukan
Model: ID-06-270
SK10 10mm Linear Bearing Rail Support is usable with any 10mm linear guide, you can simply slide the rail through, then tighten the clamp screw at the top to fix it in place.
If you need to disassemble or otherwise repair your robot or machine, it's easy to open up the clamp and remove the rail.
..
₹65
Brand: Import Dukan
Model: ID-06-271
SK12 12mm Linear Bearing Rail Support is usable with any 12mm linear guide, you can simply slide the rail through, then tighten the clamp screw at the top to fix it in place.
It can be used up to 6mm diameter bolts to attach them. If you need to disassemble or otherwise repair your robot or machi..
₹64
Brand: Import Dukan
Model: ID-06-272
SK13 13mm Linear Bearing Rail Support is usable with any 13mm linear guide, you can simply slide the rail through, then tighten the clamp screw at the top to fix it in place.
It can be used up to 6mm diameter bolts to attach them. If you need to disassemble or otherwise repair your robot or machi..
₹71
Brand: Import Dukan
Model: ID-06-269
SK8 8mm Linear Bearing Rail Support is usable with any 8mm linear guide, you can simply slide the rail through, then tighten the clamp screw at the top to fix it in place.
It can be used up to 6mm diameter bolts to attach them. If you need to disassemble or otherwise repair your robot or machine,..
₹53
Brand: Import Dukan
Model: ID-06-384
This is T8 Anti-backlash Spring Loaded Nut For 8mm Threaded Rod Lead Screw. It is used with an 8mm Lead Screw in general machine tools such as 3D printing, CNC, etc. It is made from brass and is very reliable in linear motion applications. (2*2mm)
These nuts are mainly used for high transmission,..
₹73
Brand: Import Dukan
Model: ID-06-229
This is T8 Anti-backlash Spring Loaded Nut For 8mm Threaded Rod Lead Screw. It is used with an 8mm Lead Screw in general machine tools such as 3D printing, CNC, etc. It is made from brass and is very reliable in linear motion applications. (2*8mm)
This will provide easy to install and convenient ..
₹87
Brand: Import Dukan
Model: ID-05-248
The TF Thermal Fuse RY-192°C 10A 250V is a reliable safety component designed to protect electrical circuits from overheating. With a current rating of 10A and voltage tolerance up to 250V, it ensures robust performance in diverse applications.
Its compact size makes it easy to integrate into var..
₹10
Brand: Import Dukan
Model: ID-06-439
Titan E3D 1.75mm Extruder Kit works perfectly with your installed E3D hotend, and will allow users to upgrade their 3D printer's entire extrusion system.
Features:
Type: V6 Bowden Extruder
High-quality Titan extruder
Very easy to upgrade your printer.
Suitable use for Remote and Short..
₹408
Brand: Import Dukan
Model: ID-06-418
TL-Smoother V1.0 is an addon module for 3D printer stepper motor drivers. It provides flyback diodes for the motor outputs so that they are also protected against induction voltages in the unpowered state of the driver. It can eliminate the uneven signal wave at low speed so as to achieve the effect..
₹78
Brand: Import Dukan
Model: ID-06-204
Transparent Openbuilds 5mm V-shaped Pulley for 3D Printer, it adopts motor-grade bearing, which is rust-proof, wear-resistant, and friction-resistant, and runs smoothly and without noise.
Features:
Model: V-type pulley
Bearing: 625zz bearing
Colour:Transparent+silver
Outside Diameter:..
₹49
