This is 0.28" 3 Wires Digital Voltmeter LED Display DC 0-100V from the category Sensors | RGB/LED.Specification:triple line Range of measurement: DC 0V-100VDC 4-30V two-line measurement rangeCurrent in use: greater than 20 MaRange of input: DC 5-30VDisplay: 3 digital tubes, 0.28 inches30*11.7*9.2mm ..
This is 1-8S Low Lipo Battery Voltage Tester Indicator Buzzer from the category Sensors | RGB/LED.Specification:Battery detection: 1–8s Lipo/Li-ion/LiMn/Li-FeAccuracy of voltage detection: 0.01VRange of group voltage displays: 0.5V to 4.5VRange for total voltage display: 0.5V to 36VVoltage range for..
This is 12V 24 Key RGB Colorful Light With 3528 5050 IR44 Controller Module from the category Sensors | RGB/LED.Specification:Type:RF Remote Controller with 24 KeysCommon Anode(+) is the connection mode.Voltage Range: DC 5V to 24V6A maximum outputWorking range: -20 to 60 degrees.For 3528 (5-20 metre..
This is 16 Bits WS2812 5050 RGB Ring LED Integrated Driver Module from the category Sensors | RGB/LED.1. Intelligent reverse polarity protection ensures that damaging power supply reverse polarity wont harm the IC. 2. A power LED spot light utility and an IC control circuit. 3. Control circuit chip ..
This is 16-pin 8*8 1.9mm/3.0mm/3.75mm/5.0mm Dot Matrix LED Display Red Digital Tube from the category Sensors | RGB/LED.Specification:1.9MM/3.0MM/3.75MM/5.0MM Led Size2.1 to 2.5 volts of forward voltage.20 mA is the maximum Continuous Forward Current (IFM).Temperature for Lead Soldering: 260 degrees..
This is 3.3V-5V RGB LED Strip Drive Module from the category Sensors | RGB/LED.voltage range: 3.3 to 5.0VSize of PCB: 37.2 mm x 22.5 (mm)Standard communication baud rate for an LED control panel is 9600BPS.Communication protocol for an LED control panel:Data (1) (1)Start-up signal (default is 0x1F)D..
This is 3W High-Power KEYES LED Module from the category Sensors | RGB/LED.High-powered LED module with IO port microcontroller as the controllerOutstanding for robot and search and rescue platform applicationsColor: White, Red, Yellow, Green, Blue, and PurpleCircuit board material Color temperature..
This is 61 Bit WS2812 5050 RGB LED Ring Lamp Integrated Drivers from the category Sensors | RGB/LED.Specification: Voltage:DC4-7V Single-wire communication LED chip: WS2812B communication interface Connexion: 5 volts to 5 volts GND to GND using Pin 6 Included in the package is a single 61 Bit WS2812..
This is 64 Bit WS2812 5050 RGB LED Built-in Full-color Driver Development Board from the category Sensors | RGB/LED.Specification:Power: DC 5 VThe colour RGBDimensions: 65.3 x 66.3 mmOne-64 bit WS2812 Development Board is included in the package.Note: Import Dukan Purchase Directly From Manufacturer..
This is 74HC595 Static Drive 2/3/4 Segment Digital Tube Display Module from the category Sensors | RGB/LED.
Measurements are as follows: Size: 2 Bit: 38.2*25.6mm
3 Bit: 51.8*25.1mm
4 Bit: 63.6*25.2mm
package contains:
A style confirmation is required before placing orders.
..
This is 8 Bit WS2812 5050 RGB LED Lights Built-in Full-color Development Board from the category Sensors | RGB/LED.Specification:8 x 5050 RGB full colour LEDs for highlightingPower: 5VDigital portsArduino microcontroller as a platformpackage contains:1x Development Board for WS2812 LED Lights (8 bit..
This is 8/12/16/20 Lamp Beads LED Lighting Board from the category Sensors | RGB/LED.Specification:1. The substrate is made of aluminium, and the power supply interface is powered by MICRO USB, making it simple to utilise regular mobile phone chargers and mobile power sources.2. The working current ..