This is 1.44/1.8/2.0/2.2/2.8 Inch TFT LCD Colorful Screen Display Module from the category Modules | Display/LED.1.44 Inch with PCB backplane, 128x128 Dot matrixChauffeur: ST7735Just 4 IOs can drive1.8-inch SPI serial screen with a backplane module; at least 4 IO drivers are needed.Size: SPI serial ..
This is 1.8 Inch TFT SPI Serial Port LCD Display Module from the category Modules | Display/LED.Product feature:The smallest wiring IO: (at least 3 IO)1. RST - Free when directly attached to the reset signal side of a microcontroller2. Chip select long-term effective when connected low-level, free3...
This is 12864 LCD ABS Display Screen Case from the category Modules | Display/LED.VDD: ±3.0V ~ 5.5VTwo megahertz (MHz)Type of LCD: blue128 x 64 resolutionAngle of viewing: Six oclockOperating range: -20 to +70 degrees CelsiusStorage range: -30 to +80 degrees CelsiusViewing area: 70.0 x 38.8 mm (L x ..
This is 1602A/2004A/12864B LCD Screen with IIC/I2C from the category Modules | Display/LED.Blue/Yellow/Green 1602AParameter:LCD drive voltage (Vdd-Vo): +3.0 to +5.0V Logic working voltage (Vdd): +4.8 to +5.2V-30° to 80°C for storage (Tsto) (wide temperature)-20° to +70°C working temperature (Ta) (wi..
This is 3.2 Inch ILI9341 TFT LCD Display Module from the category Modules | Display/LED.Feature: LCD touch screen module with a wide viewing angle and an ILI9341 controller (Update in May 03, 2017)3.3V compatibleSpecification:Ratio of resolution: 240 by 320: 3.2 inchesSize: 9.4 x 6.1 cm (L x W)packa..
This is 3.5 inch (320*480) TFT Touch Screen Display Module from the category Modules | Display/LED.Features:Resolution: 480 x 320True to life colours in RGB 65KTFT Display with 4-wire Resistive Touch Panel Integratedany TTL Serial Host with a simple 4-pin interface16M Flash memory for data and user ..
This is 3.5 Inch 320x480 TFT LCD Color Screen Module from the category Modules | Display/LED.Specifications:DC 3.3–5.5V is the input voltage.3.5" screen sizeScreen Component: TFTDrive IC: ILI9486; Resolution: 320x480Connectivity mode: parallel 8 bit28-Pin module (8+8+6+6+6)no touchingSize of Module:..
This is 3D Printer Controller RAMPS1.4 LCD 12864 Display Screen from the category Modules | Display/LED.Features1. Big LCD12864 Controller2. Includes an encoder that enables parameter adjustment and document selection printing!3. Ramps are plug-and-play, but the software needs to be changed to suppo..
This is 5 inch LCD HDMI Touch Screen Display TFT LCD Panel Module 800*480 for Banana Pi Raspberry Pi 2 Raspberry Pi 3 Model B / B+ from the category Modules | Display/LED.
800 × 480 pixel resolution
Resistive screens are a type of screen.
with a switch for the backlight
DC 5V / 2A Workin..
This is 5A MPPT DC-DC Step Down Module from the category Modules | Display/LED.Features:Buck module characteristics: non-isolated (BUCK)Voltage at input: 6–36 VContinuously adjustable output voltage:1.25–32 V (default output: 5V)Range of MPPT voltage settings: 6–36 VRange of output current: 0.05 to ..
This is 7 inch LCD HDMI Touch Screen Display TFT LCD Panel Module 1024*600 for Banana Pi Raspberry Pi 2 Raspberry Pi 3 Model B / B+ from the category Modules | Display/LED.
Using a capacitive touch screen, supports Banana Pi and Banana Pro are supported by the Raspberry Pi, which also includes Lu..
This is Adjustable Step Down Power Supply Module without Case from the category Modules | Display/LED. Product feature: Electrical components are made ofColor: as shown in the imageDC-DC converter typeVoltage input: 5 to 23V (better voltage 20V)0V to 16.5V as the output voltage (continuously adjusta..