This is 12-24V 895 High Torque Ball Bearing DC Motor from the category Accessories | Motor.Specifications: 50mm motor diameter 72mm motor length 5mm motor shaft diameter Step elevation: 5 mm Step size: 18 mm motor shaft: around 15 mm Fixed hole separation: around 32mm Dimensions of the mounting hole..
This is 130 Long Axis Carbon Brush Motor from the category Accessories | Motor. Details:Note: Import Dukan Purchase Directly From Manufacturer and Deliver to you without any extra charge hence We are able to provide Lowest rate and Standard Quality...
This is 3.6v 380 DIY Model Aircraft Motor from the category Accessories | Motor.Specifications:Voltage specified: 3.6v28.5mm motor diameter38mm motor lengthSize of the motor shaft: 2.3mm13mm motor shaft lengthStep elevation: 2.8mmDiameter with steps: 9.7mm2.5mm fixed aperturePitch fixed: 15.8mmmotor..
This is 365 DC Water Pump Micro Motor from the category Accessories | Motor.Power: DC5VEnergy: 3WWater inlet and outflow pipes have a diameter of 17 and 8 mm, respectively.Size: 90mmUse: water tank for fishAdvice: 12 / 16mm silicone water pipe" can be installed in the water intake, and "7 / 10mm sil..
This is 3V 18000RPM M50 Circular Motor from the category Accessories | Motor.Specifications: 10mm motor diameter 25mm motor length Size of the motor shaft: 1 mm The shaft is 3.5mm long. 1.5-3V is the voltage range. motor characteristics 8000 rpm at 1.5V, 0.06A of no-load current, and 0.5A of locked ..
This is 612 Hollow Cup Motor from the category Accessories | Motor.Motor size: 6mm * 12mm Scope of application: model aircraft, four axis aircraft Specifications: Rated voltage: 3.7V Reference speed: 42000 (RPM) Motor shaft diameter: 0.8mm Motor shaft length: 3.5mm (measured from motor surface) Moto..
This is C1A Reduction Gearbox Gear Motor from the category Accessories | Motor.Specifications: 1:20 deceleration ratio, 2mm shaft diameter 3V and 6V motor voltage work fine. Motor speed: 14500 rpm at 3 volts, dropping to 725 rpm after braking Large tooth size: 26 mm C1a reduction gearbox model Reduc..
This is C3 Unit Reducer Motor Gearbox from the category Accessories | Motor.the following details: C3 Gearbox Factor of reduction: 144 times motor speed: 17000 motor voltage: 3V output: around 118 rpm (actually slightly different) Dimensions are 5*4*3 cm, and the output shaft is 8 cm long. 1 C3 moto..
This is Crocodile Clip Line 310 Motor from the category Accessories | Motor.Specifications: Chuck length: approximately 25 mm Lead wire length: approximately 22 cm Thickness: approximately 2 mm Motor height: 21 mm Motor diameter: 24 mm Motor shaft diameter: 2 mm Motor shaft length: 9 mm Motor voltag..
This is Double Shaft Worm FK130SH Micro DC Model Motor from the category Accessories | Motor.Specifications:Size of the motor: 25 * 15.3 * 20.3mm2mm motor shaft diametermotor shaft measurements: front 18 mm, rear 8 mmWorm dimensions are 15mm long, 6.58mm wide, and 0.6 modulus.motor characteristicsGe..
This is LD02 Square Reducer Gear Motor from the category Accessories | Motor.0Note: Import Dukan Purchase Directly From Manufacturer and Deliver to you without any extra charge hence We are able to provide Lowest rate and Standard Quality...
This is Motor Gear Package from the category Accessories | Motor. Details:Note: Import Dukan Purchase Directly From Manufacturer and Deliver to you without any extra charge hence We are able to provide Lowest rate and Standard Quality...